
Distributor of arcade games, pinballs and game parts
Games For Sale | Main Site | Galaga Information | Cabinet Kits
Contact us for availability, pricing or to place an order.
Arcadeshop Amusements
985 Erve Williams Road
Moultrie, GA 31768
Order Hotline: 1-800-514-9506
International: 1-229-941-2506
Email: sgregory@arcadeshop.com
Updated: 2-3-2010
|
Whats New
2-3-10 Williams/Bally DMD Controller Boards!
12-7-09 MCR Power Supply Conversion Kit
11-13-09 Williams System 3 to 6 MPU/Driver Board!
Multi-Williams Panels - New Types!
8-28-09 Bally/Stern Power Rectifier Board!
8-28-09 Bally/Stern Six Digit LED Displays!
7-9-09 Sanyo Monitor Kits
6-17-09 New WPC089 A/N LED Pinball Display!
4-20-09 Williams WPC89 & WPC-S Fliptronics II Flipper PCB
4-06-09 New Flybacks!
4-02-09 19" CGA CRT monitors in stock!
3-19-09 Nintendo Supply Kit!
12-2-08 WPC-95 Driver Boards!
5-23-08 Pinball Displays/MPUs!
4-21-08 New Atari Cocktail Glass Clips!
3-19-08 Tron Joystick Inserts!
1-18-08 Donkey Kong II High Score Multigame!
|
Categories
Gameroom Novelties
Graphics CPOs, Bezels, Side Art
Pinball Parts
Monitors, Chassis, Cap Kits & Parts
High Score/Free Play/EPROM/Multigame Kits
JAMMA/Conversion Adapters
Power Supplies/Power Supply Kits
Wiring/JAMMA Harnesses & Cables
Chips, RAMs, ROMs, Repair Kits & Upgrades
Trackball Kits, Rollers, Bearings, Balls & Parts
T-Molding
Joysticks/Spinners/Controllers
Buttons & Switches
Bezels and Smoked Monitor Plexi
Control Panels and Parts
Lighting
Miscellaneous Cabinet Parts & Tools
Manuals
|
|
|
| Description |
Price |
Tempered Pinball Playfield Glass
21" W x 43" L x 3/16" Thick. Sold two sheets per carton, minimum order two sheets. |
$98 |
Black Knight 2000 Ramp  |
$89 |
Banzai Run Main LAPS Ramp  |
$125 |
Banzai Run Main LAPS Ramp with Flap, Decal and Hardware  |
$159 |
Creature From The Black Lagoon Bowl  |
$44 |
Congo Jump Ramp  |
$69 |
Corvette Ramp  |
$89 |
Corvette Ramp with Decals and Hardware  |
$134 |
Cyclone Comet Ramp with Hardware  |
$119 |
Earthshaker Center Main Ramp with Flap  |
$119 |
Earthshaker Center Main Ramp with Decals and Hardware  |
$149 |
Earthshaker Right Fault Ramp with Decals and Hardware  |
$89 |
Earthshaker Spiral Skill Shot Ramp with Decals and Hardware  |
$99 |
Funhouse Main Ramp  |
$129 |
Funhouse STEPS Ramp  |
$124 |
Fish Tales Ramp with Flap  |
$89 |
Fish Tales Ramp with Flap and Hardware  |
$99 |
Indiana Jones Ramp with Flap  |
$89 |
Indiana Jones Ramp with Decal and Hardware  |
$124 |
Scared Stiff Boney Beast Ramp with Flap  |
$129 |
Scared Stiff Boney Beast Ramp with Decal and Hardware  |
$159 |
Star Trek: The Next Generation Alpha Ramp with Flap  |
$99 |
Star Trek: The Next Generation Alpha Ramp with Decal and Hardware  |
$119 |
Star Trek: The Next Generation Beta Ramp with Flap  |
$99 |
Star Trek: The Next Generation Beta Ramp with Decal and Hardware  |
$119 |
Star Trek: The Next Generation Delta Ramp with Flap  |
$99 |
Star Trek: The Next Generation Delta Ramp with Decal and Hardware  |
$119 |
The Addams Family Main Ramp  |
$149 |
The Addams Family Steel Scoop  |
$49 |
The Champion Pub Punch Ramp Set  |
$99 |
Taxi Departure Ramp with Flap  |
$97 |
Taxi Departure Ramp with Decals and Hardware  |
$109 |
Theatre of Magic Main Stairs Ramp  |
$139 |
Twilight Zone Bridge Diverter Gate  |
$49 |
Twilight Zone Clear Main Ramp  |
$139 |
Twilight Zone Tinted Main Ramp  |
$139 |
Rocky and Bullwinkle Wabac Ramp  |
$109 |
White Water Big Foot Ramp  |
$129 |
White Water Suicide Canyon Ramp  |
$109 |
White Water Lower to Upper Ramp  |
$109 |
White Water Upper to Lower Ramp  |
$89 |
White Water Whirlpool Ramp  |
$99 |
Whirlwind Topper with Decals  |
$99 |
| Protective Ramp Switch Cover |
$12 |
Novus #1 Plastic Clean & Shine 2 oz. Bottle
Resists finger marking, Contains no abrasives or harsh chemicals & Leaves a smooth, clean, greaseless shine |
$2.75 |
Novus #1 Plastic Clean & Shine 8 oz. Bottle
Resists finger marking, Contains no abrasives or harsh chemicals & Leaves a smooth, clean, greaseless shine |
$3.50 |
Novus #1 Plastic Clean & Shine 64 oz. Bottle
Resists finger marking, Contains no abrasives or harsh chemicals & Leaves a smooth, clean, greaseless shine |
$19 |
Novus #2 Fine Scratch Remover 2 oz. Bottle
Removes the damage instead of filling it in, Buffs out quickly & After restoring, seals with a coat of polish |
$3.50 |
Novus #2 Fine Scratch Remover 8 oz. Bottle
Removes the damage instead of filling it in, Buffs out quickly & After restoring, seals with a coat of polish |
$4.75 |
Novus #2 Fine Scratch Remover 64 oz. Bottle
Removes the damage instead of filling it in, Buffs out quickly & After restoring, seals with a coat of polish |
$25 |
Novus #3 Heavy Scratch Remover 2 oz. Bottle
Requires use of Novus #2 for final finishing, Not recommended for use on coated plastics |
$3.95 |
Novus #3 Heavy Scratch Remover 8 oz. Bottle
Requires use of Novus #2 for final finishing, Not recommended for use on coated plastics |
$5.25 |
Novus #3 Heavy Scratch Remover 64 oz. Bottle
Requires use of Novus #2 for final finishing, Not recommended for use on coated plastics |
$29 |
| CP-100 Complete Pinball Cleaner/Polish 8 oz. Bottle |
$5.75 |
| Mill Wax Pinball Playfield Wax and Cleaner 16 oz. Bottle |
$7.75 |
| Wildcat #125 Pinball Playfield Cleaner & Polish 16 oz. Bottle |
$14.95 |
| Wildcat RC-88 Rubber Ring Cleaner 16 oz. Bottle |
$14.95 |
| Flipper Rubber Red 1/2" wide by 1 1/2" I.D. |
$0.99 |
| Flipper Rubber Black 1/2" wide by 1 1/2" I.D. |
$0.99 |
| Flipper Rubber Yellow 1/2" wide by 1 1/2" I.D. |
$1.10 |
| Flipper Rubber Red Mini 1/2" wide by 1" I.D. |
$0.99 |
| Flipper Rubber Red 3/8" wide by 1 1/2" I.D. |
$0.99 |
Stainless Steel Side Rail
For late model Williams and Bally pinball machines, including wide and regular body machines. Williams part ref. #A-12359-3
Note: Rails are sold as a single unit, not a set. |
$28 |
Chrome Pinball Leg 28.5"
Williams part ref. #A-19514 |
$16.95 |
Black Pinball Leg 28.5"
Williams part ref #A-19514-2 |
$17.75 |
Pinball Leg Bolt Plate
Williams part ref #01-11400-1 |
$4.50 |
Williams Flipper Rebuild Kit New Fliptronic Style
Williams part ref #A-13524-8 For 1992 - 1999 Williams and Bally pinball machines with Fliptronic flippers |
$27.50 |
Williams Flipper Rebuild Kit Older Style
Williams part ref #A-13524-1. For for 1985 - 1991 Williams and Bally pinball machines |
$27.50 |
Williams/Bally Flipper Assembly - Left
Williams part ref #A-15849-L-2 and comes with coil #FL-11630. Used on all late model Williams, Bally, and other brand
pinball machines. |
$39 |
Williams/Bally Flipper Assembly - Right
Williams part ref #A-15849-R-2 and comes with coil #FL-11630. Used on all late model Williams, Bally, and other brand
pinball machines. |
$39 |
Williams/Bally Coil FL-11753 50v
Includes sleeve. We recommend installing a flipper rebuild kit before installing an new coil.
This coil is used on the following machines:
Twilight Zone (upper flipper)
Road Show (upper flipper)
Johnny Mnemonic (2-upper flippers)
Safecracker (upper flipper)
Tales of the Arabian Nights (upper flipper)
Medieval Madness (upper flippers)
Addams Family (upper flipper)
Funhouse (2-upper flippers)
Swords of Fury (2-upper flippers)
Big Guns (2-upper flippers)
|
$11.95 |
Williams/Bally Coil FL-11629 50v
Includes sleeve. We recommend installing a flipper rebuild kit before installing an new coil. |
$9.95 |
Williams/Bally Coil FL-11630 50v
Includes sleeve. We recommend installing a flipper rebuild kit before installing an new coil. |
$9.95 |
Williams/Bally Coil FL-15411
Includes sleeve. We recommend installing a flipper rebuild kit before installing an new coil. |
$9.95 |
Williams/Bally Coil AE23-800-03
Includes sleeve. We recommend installing a flipper rebuild kit before installing an new coil. |
$6.95 |
Williams/Bally Coil AE26-1200
Includes sleeve. We recommend installing a flipper rebuild kit before installing an new coil. |
$6.95 |
White Generic Flipper Shaft Assembly for Williams/Bally
Note: This flipper does not have any logo! P/N: 20-10110-5 |
$3.50 |
Yellow Flipper Shaft Assembly for Williams/Bally
Note: This flipper has the Williams "W" logo. P/N: 20-10110-6 |
$3.50 |
Opto Sensor for Flipper boards
Ref #P/N: 5490-13451-00 Used mostly in WPC Bally & Williams flipper opto boards & Twilight Zone Clock Board |
$4 |
| Universal Ball Shooter Assembly |
$19 |
Williams Plunger Spring - Red
Ref Williams P/N:10-148-2 Highest tension ball shooter spring available. |
$1.75 |
Williams Plunger Spring - Metal Finish
Ref Williams P/N:10-148-2 Highest tension ball shooter spring available. |
$1.75 |
Barrel Spring
Ref Williams #10-149, Data East/Sega/Stern #266-5010-00, Game Plan 06-30002A |
$.75 |
Williams/Bally Flipper Return Spring
Ref Williams #10-364, Used on late model Williams, Bally and other brand pinball
flipper assemblies with Fliptronic external extension type return springs. |
$.75 |
Williams Flipper Bushing
Ref Williams P/N:03-7568. |
$2.95 |
Bally Drop Target - White
Ref Bally P/N:A3944. |
$2.75 |
Ultimate Bally/Stern MPU PCB
Replacment MPU Supports 93 Games! This item qualifies for FREE shipping! * |
$199 |
Ultimate Bally/Stern MPU Test Card
This test adapter is an add on feature for the above Bally/Stern MPU |
$45 |
Ultimate Bally/Stern Solenoid Driver Board
Supports 85+ Games! |
$149 |
Ultimate Bally/Stern Lamp Driver Board
Supports 85+ Games! |
$99 |
Bally/Stern Power Rectifier Board $55
Direct plug in replacement for the original OEM rectifier board. Replaces Bally part numbers: AS2518-18 and AS2518-49
Key Benefits
- Larger bridge rectifiers for long term operation
- 100% Through-hole components for future serviceability
- 100% Off the shelf commercially available parts (no custom parts)
- Test points added to check all incoming and outgoing voltages
Supported Bally Pins |
| Black Jack |
Dolly Parton |
Eight Ball |
Evel Knievel |
| Freedom |
Frontier |
Future Spa |
Harlem Globe Trotters |
| Hotdoggin |
Kiss |
Lost World |
Mata Hari |
| Mystic |
Night Rider |
Nitro Ground Shaker |
Paragon |
| Playboy |
Power Play |
Rolling Stones |
Silverball Mainia |
| Six Million Dollar Man |
Skate Ball |
Space Invaders |
Star Trek |
| Strikes and Spares |
Supersonic |
Viking |
Voltan Escapes Cosmic Doom |
| X's and O's |
|
|
|
Supported Stern Pins |
| Ali |
Big Game |
Catacomb |
Cheetah |
| Cosmic Princess |
Dracula |
Dragonfist |
Flight 2000 |
| Free Fall |
Galaxy |
Hot Hand |
Iron Maiden |
| Lazer Lord |
Lectronamo |
Lightning |
Magic |
| Memory Lane |
Meteor |
Nine Ball |
Nugent |
| Orbitor 1 |
Pinball |
Quicksilver |
Seawitch |
| Split Second |
Star Gazer |
Stars |
Stingray |
| Trident |
Viper |
Wild Fyre |
|
|
$55 |
Bally/Stern Voltage Regulator / Driver Board $85
Direct plug in replacement for the original OEM power supply. The original power supply that this board
replaces is Bally part numbers: AS2518-22 and AS2518-17
Key Benefits
- New Low Drop Out (LDO) +5V section regulates to lower line voltages than the original design
- LED lights added to show +5V and +180V is functioning properly!
- Higher current carrying and higher voltage breakdown transistors for longer life
- 100% Through-hole components for future serviceability
- 100% Off the shelf commercially available parts (no custom parts)
- Simplified design for easier troubleshooting
- Test points added to check all incoming and outgoing voltages
- Fuse added for +180V supply (not present on the original -22 boards)
Supported Bally Pins |
| Black Jack |
Black Pyramid |
BMX |
Centaur |
| Centaur II |
Cybernaut |
Dolly Parton |
Eight Ball |
| Eight Ball Deluxe |
Eight Ball Deluxe Classic |
Eight Ball Deluxe Lmtd. |
Elekta |
| Embryon |
Evel Knievel |
Fathom |
Fire-Ball II |
| Fireball Classic |
Flash Gordon |
Freedom |
Frontier |
| Future Spa |
. |
Grand Slam |
. |
| Harlem Globe Trotters |
Hotdoggin |
Kings of Steel |
Kiss |
| Lost World |
Mata Hari |
Medusa |
Mr. & Ms. Pac-Man |
| Mystic |
Night Rider |
Nitro Ground Shaker |
Paragon |
| Playboy |
Power Play |
Rapid Fire |
Rolling Stones |
| Silverball Mainia |
Six Million Dollar Man |
Skate Ball |
Space Invaders |
| Speakeasy |
. |
Spectrum |
Spy Hunter |
| Star Trek |
Strikes and Spares |
Super Sonic |
Vector |
| Viking |
Voltan |
X's and O's |
Xenon |
Supported Stern Pins |
| Ali |
Big Game |
Catacomb |
Cheetah |
| Cosmic Princess |
Dracula |
Dragonfist |
Flight 2000 |
| Free Fall |
Galaxy |
Hot Hand |
Iron Maiden |
| Lazer Lord |
Lectronamo |
Lightning |
Magic |
| Memory Lane |
Meteor |
Nine Ball |
Nugent |
| Orbitor 1 |
Pinball |
Quicksilver |
Seawitch |
| Split Second |
Star Gazer |
Stars |
Stingray |
| Trident |
Viper |
Wild Fyre |
|
|
$85 |
Stern Whitestar Driver Board.
A direct plug in replacement for the original OEM driver board compatible with Stern White Star pinball games.
Key features:
- Superior +5V Low Drop Out (LDO) regulation for operation at lower line voltages
- Test points and LEDs added for all voltages generated on the board
- Lamp Matrix upgraded to Williams Style TIP107s
- Bridge Rectifiers replaced with discrete 5A diodes similar to WPC95 boards
- Test points are in one location and clearly marked for easy troubleshooting
- Normal sized fuses are utilitized in place of smaller fuses.
- Same component designators used to allow troubleshooting from original schematics (schematics supplied with board)
- All new (not 15+ year old) components and PCB
Games supported listed below.
- Austin Powers
- Elvis
- Godzilla
- Grand Prix
- Harley - Davidson
- High Roller Casino
- Independence Day
- Lord of the Rings
- Lost in Space
- Lost World
- Monopoly
- NASCAR
- Playboy
- Ripley's Beleive it or Not
- Roller Coaster Tycoon
- Simpson's Pinball Party
- Sopranos
- South Park
- Space Jam
- Star Wars Trilogy
- Starship Troopers
- Striker Xtreme
- Terminator 3
- Twister
- Viper Night Driving
- X-Files
|
$249 |
Ni Wumpf Gottlieb System 1 CPU Replacement
Single MPU (Main Processor Unit) Supports the following Pinball Machines!
Buck Rogers, Charlie’s Angels, Cleopatra, Close Encounters, Countdown, Dragon, Genie,
Incredible Hulk, Joker Poker, Pinball Pool, Roller Disco, Sinbad, Solar Ride, Torch & Totem
|
$175 |
Gottlieb System 1 Driver PCB
Direct plug in replacement for the original Gottlieb System 1 pinball Driver Board which has
the following features:
- Higher Voltage Breakdown Transistors for longer life
- Lower power dissipation transistors for less heat generation
- Higher current drive transistors for better operation
- Simplified design for ease of troubleshooting
- Silkscreen showing all component designators and locations
Supports the following Pinball Machines:
Asteroid Annie, Buck Rogers, Charlie’s Angels, Cleopatra, Close Encounters, Countdown, Dragon, Genie,
Incredible Hulk, Joker Poker, Pinball Pool, Roller Disco, Sinbad, Solar Ride, Torch & Totem
|
$65 |
Ni Wumpf Gottlieb System 80 CPU
Single CPU (Central Processor Unit)
Gottlieb System 80 Pinball CPU PCB. This is a programmable CPU which can be loaded or updated with game software.
Programming is a snap for anyone with a computer and an RS-232 (serial) cable, but we are happy to pre-load the CPU
for the game you need.
Note: Only one game can be loaded at a time, and we can preload the CPU for you.
This game currently supports these Pinball Machines:
- Black Hole
- Haunted House
- Panthera
- Spiderman
- Volcano
- Devil's Dare
- Counter Force
- Mars

- Circus

Support for additional games will become available as developers release new software binary images.
Gottlieb System 80 CPU Manual in .PDF format.
|
$195 |
Bally / Williams WPC/WPC-S Dot Matrix Display Controller Board.
Dot Matrix Controller board compatible with Williams WPC89 and WPC-S pinball machines. This board replaces
Bally/Williams part numbers: A-14039 (all version). See the game list below.
Key Benefits:
- High voltages produced are -120v, -106v and +64v. These voltages can be adjusted by changing resistor values.
- Redesigned , simplified high voltage section which eliminates high temperature circuit board burn. This board will not burn up like the originals.
- LEDs added for visual verification of +5 voltage.
- Test point locations centralized into one location and clearly marked for easier troubleshooting.
Games supported listed below.
- Addams Family
- Addams Family Gold
- Black Rose
- Corvette
- Creature From the Black Lagoon
- Demolition Man
- Dirty Harry
- Dr. Who
- Dracula
- Fish Tales
- Flintstones
- Funhouse
- Gilligan's Island
- Harley Davidson
- Hurricane
- Indiana Jones
- Indianapolis 500
- Jackbot (DMD versions only)
- Johnny Mnemonic
- Judge Dredd
- No Fear
- Party Zone
- Popeye
- Road Show
- Star Trek The Next Generation
- Terminator 2
- The Getaway
- The Machine, Bride of Pinbot
- The Shadow
- Theatre of Magic
- Twilight Zone
- White Water
- Who Dunnit
- World Cup Soccer '94
|
$89 |
Bally / Williams WPC-89 MPU processor board (TH).
The original MPU board that this board replaces is Bally / Williams part number A-12742-xx (where xx is the game number).
Note: You must remove the ASIC, Microprocessor & game ROM from your old board and install it on this board.
We have new ASIC chips as an option for the WPC-89 MPU - $39 (only available with a MPU board)
Games supported listed below.
- Addams Family
- Addams Family Gold
- Black Rose
- Creature From the Black Lagoon
- Demolition Man
- Dr. Dude
- Dr. Who
- Dracula
- Fish Tales
- Funhouse
- Getaway
- Gilligan's Island
- Harley Davidson
- Hurricane
- Indiana Jones
- Judge Dredd
- Machine Bride of Pinbot
- Party Zone
- Popeye
- Slugfest
- Star Trek, The Next Generation
- Terminator 2
- Twilight Zone
- White Water
|
$149 |
Williams Supplemental 8 Driver Board for WPC Pinball Machines
Supplemental Williams Driver Board compatible used on some Williams WPC89 pinball games. The boards that this replaces are Williams part numbers A-16100-01 and A-16100-2
See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board.
Key Benefits:
- Simplified solenoid driver design using FET technology with oversized transistors
- All new (not 15+ year old) components and PCB
- Simplified 11 separate jumpers down to only ONE!
- Silk screen clearly outlining components and jumper purposes
Look at the picture. The jumper SW4 replaces the 11 separate jumpers on the original board. Order for the board for your specific game to insure plug and play operation, or order with jumper SW4 in (WDB008-1) and only remove jumper when installing into Demolition Man or Road Show.
Games supported listed below.
- Demolition Man
- Indiana Jones
- Road Show
- Star Trek The Next Generation
- Twilight Zone
|
$28 |
Williams / Bally WPC-89 & WPC-S Power Driver board.
Replaces Williams Part numbers: A-12697-1, A-12697-2, A-12697-3 and A-12697-4 boards.
New features:
- Discrete diodes replace bridge rectifiers for ease of troubleshooting and reduction in heat
- Test points and LEDs added for all voltages generated on the board
- Simplified solenoid driver design using FET technology
- Inrush current reduced for longer supply life
- Superior +5V LDO regulation
- Through-hole construction and stock parts ensure field repair and long term support
- LED indicators and clean layout make troubleshooting a breeze
- Plug and play
Games supported listed below.
- Addams Family
- Addams Family Gold
- Black Rose
- Corvette
- Creature From the Black Lagoon
- Demolition Man
- Dirty Harry
- Dr. Dude
- Dr. Who
- Dracula
- Fish Tales
- Flintstones
- Funhouse (WPC System only)
- Getaway
- Gilligan's Island
- Harley Davidson
- Hurricane
- Indiana Jones
- Indianapolis 500
- Jackbot (Not required in all Jackbots)
- Johnny Mnemonic
- Judge Dredd
- No Fear
- Party Zone
- Popeye
- Road Show
- Shadow
- Slugfest
- Star Trek The Next Generation
- Terminator 2
- The Machine, Bride of Pinbot
- Theatre of Magic
- Twilight Zone
- White Water
- Who Dunnit
- World Cup Soccer
|
$249 |
Williams / Bally WPC-95 Power Driver board.
Replaces Williams Part number: A-20028 and is a direct plug in replacement for the original OEM driver board.
Key features:
- Superior +5V Low Drop Out (LDO) regulation for operation at lower line voltages
- Simplified solenoid driver design using FET technology with oversized transistors
- Test points and LEDs added for all voltages generated on the board
- Test points are in one location and clearly marked for easy troubleshooting
- Normal sized fuses are utilitized in place of smaller fuses.
- Same component designators used to allow troubleshooting from original schematics (schematics supplied with board)
- All new (not 15+ year old) components and PCB
Games supported listed below.
- Attack from Mars
- Cactus Canyon
- Cirqus Voltaire
- Congo
- Junkyard
- Medieval Madness
- Monster Bash
- NBA Fastbreak
- No Good Gofers
- Safe Cracker
- Scared Stiff
- Tales of the Arabian Nights
- The Champion Pub
- Ticket Tac Toe
|
$249 |
| Twilight Zone Clock Board
New, improved single board Clock PCB for Bally TWILIGHT ZONE that replaces BOTH original clock boards and eliminates original design problems. |
$74 |
| Scared Stiff Crate LED Board
New design, direct plug in replacement for the original Bally Scared Stiff Crate Board. |
$31 |
Gottlieb System 3 Driver Board $105 
Direct plug in replacement for the original Gottlieb System 3 pinball driver board.
Key Benefits
- TIP107 used for lamp matrix drive (same as Williams)
- All new though hole components
Supported games:
- Amazon Hunt 3
- Barb Wire
- Bell Ringer
- Big Hurt
- Brooks & Dunn
- Cactus Jack
- Car Hop
- Caribbean Cruise
- Class of 1812
- Cue Ball Wizard
- Deadly Weapon
- Freddy: Nightmare on Elm Street
- Gladiators
- Hoops
- Lights, Camera, Action
- Mario Andretti
- Nudge It
- Operation Thunder
- Rescue 911
- Shaq Attaq
- Silver Slugger
- Stargate
- Street Fighter
- Street Fighter 2
- Strikes 'N Spares
- Surfin Safari
- Super Mario Brothers
- Teed Off
- Title Fight
- Vegas
- Water World
- Wipe Out
- World Challenge Soccer
|
$105 |
| Gottlieb System 1 Power Supply
Direct plug in replacement for the original Gottlieb System 1 pinball power supply.
Supported Games:
- Asteroid Annie
- Buck Rodgers
- Charlie's Angels
- Cleopatra
- Close Encounters
- Count Down
- Dragon
- Genie
- Hulk
- Joker Poker
- Pinball Pool
- Roller Disco
- Sinbad
- Solar Ride
- Torch
- Totem
|
$65 |
Gottlieb System 80 Pop Bumper Board $17 
Direct plug in replacement for the original Gottlieb System 80 Pop Bumper board P/N: D-20923.
Key Benefits
- Simplified design for ease of troubleshooting (fewer parts)
- Screen printed component designators and locations
- High efficiency FET transistor drive for better operation (less heat)
- TO220 transistor package for ease of repair
- Made with new technology/parts which are easily obtainable
Supported games:
- Alien Star
- Amazon Hunt
- Amazon Hunt II
- Amazon Hunt III
- Arena
- Bad Girls
- Big House
- Black Hole
- Bone Busters Inc.
- Bounty Hunter
- Caveman
- Chicago Cubs Triple Play
- Circus
- Counterforce
- Devil's Dare
- Diamond Lady
- El Dorado
- Excalibur
- Force II
- Games, The
- Genesis
- Going Nuts
- Gold Wings
- Haunted House
- Hollywood Heat
- Hot Shots
- Ice Fever
- Jacks to Open
- James Bond
- Krull
- Mars God of War
- Monte Carlo
- Panthera
- Pink Panther
- Punk
- Q*bert's Quest
- Rack Em Up
- Raven
- Ready Aim Fire
- Robo-War
- Rock
- Rock Encore
- Rocky
- Royal Flush Dix
- Spiderman
- Spirit
- Spring Break
- Star Race
- Striker
- Super Orbit
- Tag Team
- The Games
- Timeline
- Touchdown
- TX Sector
- Victory
- Volcano
|
$17 |
Gottlieb System 80 Driver Board $90 
Direct plug in replacement for the original Gottlieb System 80 pinball driver board.
Key Benefits
- higher voltage Breakdown Transistors for longer life
- Higher current carrying transistors for longer life
- Lower power dissipation transistors for less heat generation
- Higher current drive transistors for better operation
- Simplified design for ease of troubleshooting
- Silkscreen showing all component designators and locations
- LED added to show when power is supplied to the board
- Ground screw lug added to easily attach ground wires to back box / power supply
- Made with new technology parts that are easily obtainable
Supported games:
- Alien Star
- Amazon Hunt
- Amazon Hunt II
- Amazon Hunt III
- Areana
- Bad Girls
- Big House
- Black Hole
- BoneBusters, Inc.
- Bounty Hunter
- Caveman
- Chicago Cubs Triple Play
- Circus
- Counterforce
- Devil's Dare
- Diamond Lady
- El Dorado
- Excalibur
- Force II
- Games, The
- Genesis
- Going Nuts
- Gold Wings
- Haunted House
- Hollywood Heat
- Hot Shots
- Ice Fever
- Jacks to Open
- James Bond
- Krull
- Mars God of War
- Monte Carlo
- Panthera
- Pink Panther
- Punk
- Q*bert's Quest
- Rack Em Up
- Raven
- Ready Aim Fire
- Robo-War
- Rock
- Rock Encore
- Rocky
- Royal Flush Dix
- Spiderman
- Spirit
- Spring Break
- Star Race
- Striker
- Super Orbit
- Tag Team
- The Games
- Timeline
- Touchdown
- TX Sector
- Victory
- Volcano
|
$90 |
| Gottlieb System 80 Power Supply
Direct plug in replacement for the original Gottlieb System 80 pinball power supply. The original
power supply is Gottlieb P/N: B-19694
Key Benefits
- High Efficiency +5V section reduces heat dissipation
- All new (not 20+ year old) components and PCB
Supported games:
- Alien Star
- Amazon Hunt
- Black Hole
- Caveman
- Circus
- Counterforce
- Devil's Dare
- El Dorado
- Force II
- Games, The
- Going Nuts
- Haunted House
- Ice Fever
- Jacks to Open
- James Bond
- Krull
- Mars God of War
- Panthera
- Pink Panther
- Punk
- Q*bert's Quest
- Rack Em Up
- Ready Aim Fire
- Rocky
- Royal Flush Dix
- Spiderman
- Spirit
- Star Race
- Striker
- Super Orbit
- The Games
- Timeline
- Touchdown
- Volcano
|
$59 |
Williams System 3, 4 and 6 Power Supply
Replacement power supply for Williams pinball machines.
Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new components and PCB
Games Supported:
- Algar
- Alien Poker
- Blackout
- Contact
- Disco Fever
- Firepower
- Flash
- Gorgar
- Hot Tip
- Lucky Seven
- Phoenix
- Scorpion
- Stellar Wars
- Time Warp
- Tri Zone
- World Cup
|
$69 |
Williams System 3, 4 and 6 Combination MPU and Driver Board
This board replaces both the MPU AND Driver board for ALL Williams System 3, 4 and 6 pinball games.
Benefits over original Williams MPU and Driver board
- Eliminates the extremely problematic interconnect connector that fastens the original boards together
- Eliminates the need to swap out game ROMs. Game ROMs are selectable via DIP switch
- Comprehensive on-board diagnostics using Leon's test code via DIP switch http://www.flipper-pinball-fan.be/
- Uses 6802 instead of 6800 microprocessor
- Uses a single commercially available oscillator component for timing
- Uses Williams WPC style controlled lamp circuit design (TIP107)
- Uses Logic Level FET drivers for all solenoids and lamp controls
- Uses single shot (70ms) for Special Solenoids (no more burned board due to shorted contacts
- Uses sockets for comon failure components (micro, PIA and RAM)
- Uses a low voltage reset to keep microprocessor from locking up
This game does use custom software that is NOT compatible with your original game's board set. Software may be modified over time and will be made available online.
Games Supported:
- Algar
- Alien Poker
- Blackout
- Contact
- Disco Fever
- Firepower
- Flash
- Gorgar
- Hot Tip
- Laser Ball
- Lucky Seven
- Phoenix
- Pokerino
- Scorpion
- Stellar Wars
- Time Warp
- Tri Zone
- World Cup
|
$259 |
Williams System 7 and 9 Power Supply
Replacement board for Willimas pinball machines.
Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new components and PCB
Games Supported:
- Barracora
- Black Knight
- Comet
- Cosmic Gunfight
- Defender
- Firepower 2
- Hyperball
- Joust
- Jungle Lord
- Laser Cue
- Pharaoh
- Solar Fire
- Sorcerer
- Space Shuttle
- Star Light
- Time Fantasy
- Varkon
- Warlock
|
$75 |
Data East Universal 3-In-1 Flipper Board
Universal flipper board that works in all Data East / Sega pinball games that used a flipper board. With a simple DIP switch setting, the board is customized to your specific game title.
This board is a direct plug in replacement for the original OEM flipper board.
The original flipper boards that this board replaces are Data East part numbers:
520-5033-00, 520-5033-03, 520-5070-00, 520-5076-00, and 520-5080-00
Key Benefits
- Consolodates 5 different designs into one!
- 100% new, commercially available, through-hole components
- Simplified one-shot flipper section
- Game listing / selection included on easy to read silk screen
Games Supported:
- Back to the Future
- Batman
- Batman Forever
- Baywatch
- Checkpoint
- Frankenstein
- Guns n Roses
- Hook
- Jurassic Park
- Last Action Hero
- Lethal Weapon 3
- Maverick
- Phantom of the Opera
- Robocop
- Rocky and Bullwinkle
- Star Trek 25th Anniversary
- Star Wars (Data East)
- Tales From The Crypt
- Teenage Mutant Ninja Turtles
- The Simpsons
- Tommy, The Who's
- WWF Royal Rumble
|
$69 |
Williams / Bally System 11c MPU / Driver Board
This completely redesigned board replaces Williams/Bally System 11c MPU/Driver Board part numbers D-11883-xxx (where xxx is the game number).
Our boards are plug-and-play compatible with the original board set (assuming the common 512k Game ROM). No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".
Benefits over the original board:
- Williams type mounting holes for ease of install
- No batteries required for memory retention (no acid damage, ever!)
- Simplified driver design using logic level FETs
- Feefed up switch matrix drive for better durablity (good to 100v back drive)
In addition:
- Board is made with 100% through hole components
- No custom parts used in this design (all parts can be purchased through usual suppliers)
- Major component designators carried over from original design so original schematics can be used
- Jumpers and ROM configurations clearly labeled on silk screen
- Board comes jumpered for the 512k Game ROM (80% of games)
- Board comes with complete set of schematics
Note:
In order to keep the price of this board as low as possible, the baseline price does NOT include the
microprocessor (M6802) or the Game ROM(s) as all are socketed on the original board and can be moved
to our new board fairly easily. We do offer the board with these included; However, you would need
to look at the additional pricing in the table below to do this.
Supported Games |
| Bugs Bunny Birthday Ball |
| Diner |
| Dr. Dude (System 11 version) |
| Game Show, The Bally |
| Pool Sharks |
| Radical |
| Riverboat Gambler |
| Roller Games |
|
$249 |
Data East & Sega MPU / Driver Board
This completely redesigned board replaces Data East's MPU / Driver Board part numbers 520-50003-01, 520-50003-02 and 520-50003-03.
Our boards are plug-and-play compatible with the original board set (assuming the common 512k Game ROM). No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".
Benefits over the original board:
- Williams type mounting holes for ease of install
- No batteries required for memory retention (no acid damage, ever!)
- Simplified driver design using logic level FETs
- Feefed up switch matrix drive for better durablity (good to 100v back drive)
- All new through hole components
In addition:
- Board is made with 100% through hole components
- No custom parts used in this design (all parts can be purchased through usual suspects)
- Major component designators carried over from original design so original schematics can be used
- Jumpers and ROM configurations clearly labeled on silk screen
- Board comes jumpered for the 512k Game ROM (80% of games)
- Board comes with complete set of schematics
Game ROM Details:
Data East / Sega had 3 different versions of its MPU / driver board. These part numbers were:
#520-5003-01 - Used (if ever) on first DE game Laser Wars
#520-5003-02 - Used up until Phantom of the Opera / Back to the Future
#520-5003-03 - Used until end of production (up to Batman Forever).
MPU004 replaces all three versions of these boards, however, as with the original boards,
there is a jumper that must be moved based on the size of the game EPROM used.
This jumper on our board, as well as the original DE/Sega boards is clearly marked as jumpers J4 & J5. Our MPU004 comes as a default jumper setting for the 512k EPROM version (J5).
Please see the photo which shows the jumpers on the MPU004. This picture shows J5 as being installed. The jumper would need to be moved to the J4 setting if the smaller 256k + 128k version game ROMs are used instead of a single 512k game ROM.
Note:
In order to keep the price of this board as low as possible, the baseline price does NOT include the
microprocessor (M6802) or the Game ROM(s) as all are socketed on the original board and can be moved
to our new board fairly easily. We do offer the board with these included; However, you would need
to look at the additional pricing in the table below to do this.
|
$249 |
Data East Power Playfield Board (PPB)
Replacement board used in most Data East pinball machines. See supported game list below...
This board is a direct plug in replacement for the original OEM board and replaces the
original Data East part numbers: 520-5021-00 and 520-5021-05.
Key Benefits
- Elimates defects of the oringal OEM board's constant solder cracking with double sided, plated through holes
- Added LED for visual feedback of the +50 volt power
- Added test points for checking voltages (+50v and +28v)
- Extra safety fuses (3) added for power supply protection
- All new through hole components
Games Supported:
- ABC Monday Night Football
- Back to the Future
- Batman
- Batman Forever
- Baywatch
- Checkpoint
- Frankenstein
- Guns n Roses
- Hook
- Jurassic Park
- Last Action Hero
- Lethal Weapon 3
- Maverick
- Phantom of the Opera
- Playboy 35th Anniversary
- Robocop
- Rocky and Bullwinkle
- Simpsons, The
- Star Trek 25th Anniversary
- Star Wars (Data East)
- Tales From The Crypt
- Teenage Mutant Ninja Turtles
- Time Machine
- Tommy, The Who's
- Torpedo Alley
- WWF Royal Rumble
|
$85 |
Data East Dot Matrix Display Power Supply
Replacement board for all Data East pinball machines that use a 128 x 32 or 128 x 16 dot matrix displays.
Replaces the original Data East part numbers:
- 520-5047-00
- 520-5047-01
- 520-5047-02
- 520-5047-00 Revision C
Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new components and PCB
Games Supported:
- Batman
- Checkpoint
- Guns N' Roses
- Hook
- Jurassic Park
- Last Action Hero
- Lethal Weapon 3
- Rocky & Bullwinkle
- Star Trek 25th Anniversary
- Star Wars (Data East)
- Tales From The Crypt
- Teenage Mutant Ninja Turtles
- Tommy
- WWF Royal Rumble
|
$79 |
Data East/Williams Alphanumeric Pinball Power Supply (11a)
Data East / Williams Pinball Power Supply Replacement Board for games with Alphanumeric Displays.
This replaces Williams part #D-8345-XXX and Data East part #520-5000-00.
Williams Part Number D-8345-xxx (where xxx is game number)
Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new components and PCB
Supported games:
- Alley Cats Shuffle Alley
- Banzai Run
- Big Guns
- Cyclone
- F-14 Tomcat
- Fire!
- Grand Lizard
- High Speed
- Millionaire
- Pinbot
- Road Kings
- Space Station
- Swords of Fury
Data East Part Number 520-5000-000.
Supported games:
- Back to the Future
- Laser War
- Monday Night Football
- Phantom of the Opera
- Playboy 35th Anniversary
- RoboCop
- Secret Service
- Star Trek 25th Anniversary
- The Simpsons (1990)
- Time Machine (Data East)
- Torpedo Alley
|
$79 |
Williams Alphanumeric Pinball Power Supply (11c)
Williams Pinball Power Supply Replacement Board for games with Alphanumeric Displays.
This replaces Williams part # D-12246-xxx.
Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new components and PCB
Supported games:
- Bad Cats
- Black Knight 2000
- Bugs Bunny Birthday Ball
- Diner
- Dr Dude
- Earthshaker
- Elvira and the Party Monsters
- Game Show
- Jokerz
- Mousin Around
- Police Force
- Pool Sharks
- Radical
- River Boat Gambler
- Rollergames
- Transporter
- Whirl Wind
|
$75 |
| Bally Williams Type 2 Flipper Board
Direct plug in replacement for the original Bally / Williams Type 2 flipper board.
Games supported:
- Attack from Mars
- Cactus Canyon
- Championship Pub
- Circus Voltaire
- Congo
- Corvette
- Demolition Man
- Dirty Harry
- Flintstones
- Indiana Jones
- Indianapolis 500
- Jackbot
- Johnny Mnemonic
- Judge Dredd
- Junkyard
- Medieval Madness
- Monster Bash
- NBA Fastbreak
- No Fear
- No Good Gofers
- Popeye
- Roadshow
- Safe Cracker
- Scared Stiff
- Shadow
- Star Trek the Next Generation
- Tales of the Arabian Nights
- Theatre of Magic
- Who Dunnit
- World Cup Soccer '94
|
$12 |
Williams WPC89 and WPC-S Fliptronics II Flipper Board
Direct plug in replacement for the original board P/N: A-15472 / A-15472-1
Key Benefits:
- Simplified solenoid driver design using FET technology with oversized transistors
- All new (not 15+ year old) components and PCB
- Screen print outlines components and jumper purposes
Games supported:
- Addams Family Gold
- Black Rose
- Corvette
- Creature From the Black Lagoon
- Demolition Man
- Dirty Harry
- Dr. Dude
- Dr. Who
- Dracula
- Fish Tales
- Flintstones
- Funhouse (WPC System only)
- Getaway
- Gilligan's Island
- Harley Davidson
- Hurricane
- Indiana Jones
- Indianapolis 500
- Jackbot (Not required in all Jackbots)
- Johnny Mnemonic
- Judge Dredd
- No Fear
- Party Zone
- Popeye
- Road Show
- Shadow
- Slugfest
- Star Trek The Next Generation
- Terminator 2
- The Machine, Bride of Pinbot
- Theatre of Magic
- Twilight Zone
- White Water
- Who Dunnit
- World Cup Soccer
|
$50 |
Dot Matrix Display 128 x 32
Complete Assembly - Plug and play |
$139 |
Dot Matrix Display 192 x 64
Complete Assembly - Plug and play |
$349 |
| Replacement 4 Digit Numeric Glass Display |
$42 |
| Replacement 6 Digit Numeric Glass Display |
$48 |
| Replacement 7 Digit Numeric Glass Display |
$49 |
| Replacement 7 Digit Alpha Numeric Glass Display |
$49 |
| Replacement 16 Digit Alpha Numeric Glass Display |
$95 |
Williams WPC89 Alpha Numeric LED Display
This board replaces Williams display part numbers xxxxx. They are made from an advanced LED technology that was not available when the original boards were made by Williams. We spent quite a bit of time matching the original color and brightness and are quite happy with the results.
Our boards are plug-and-play compatible with the original board set. No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".
Benefits over original Williams displays (and other replacement boards):
- No High Voltage Required! These will operate with a defective +/- 100v power supply
- No Fragile Gas Display! This light weight LED display should last 10x longer than original displays
- Simple design ( 6 Integrated circuits, NO transistors)
- All integrated components are current technology and utilize through-hole parts available from most distributors
- LEDs are made with black face to help in visual aesthetics when machine is powered off
- Board comes with complete set of schematics
Supported Games:
|
$150 |
Williams System 3/4/6 - Six Digit LED Display
This board set replaces William's display part number Dxxxxx. It is made from an advanced LED technology that was not available when the original boards were made by Williams. We spent quite a bit of time matching the original color and brightness and are quite happy with the results.
The boards shown in the picture above are the prototype set. The actual boards are black in color.
Our boards are plug-and-play compatible with the original board set. No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".
When you order quantity "1" DIS326 you get a total of 5 boards. You get one master display board and 4 of the six digit displays. All of these boards can be "upgraded" with our part number KIT326 which adds optional ribbon cable connectors and ribbon cables; However, to keep the cost low, these are an add on as they are not really necessary (but can be used to replace the poor choice Williams made in using edge card connectors).
Benefits over original Williams displays (and other replacement boards):
- No High Voltage Required! These will operate with a defective +/- 100v power supply
- No Fragile Gas Display! This light weight LED display should last 10x longer than original displays
- Simple design ( 7 Integrated circuits, NO transistors)
- Zero custom integrated circuits. Most parts are available though open market
- LEDs are made with black face to help in visual aesthetics when machine is powered off
- Board comes with complete set of schematics
Supported Games:
- Blackout
- Contact
- Disco Fever
- Fire Power
- Flash
- Gorgar
- Hot Tip
- Lazer Ball
- Lucky Seven
- Phoenix
- Pokerino
- Scorpion
- Stellar Wars
- Time Warp
- Tri-Zone
- World Cup
|
$150 |
Williams / Data East 4 Player, 7 Digit LED Display
This board replaces William's display part number D-11610 and Data East part number 520-5014-01.
It is made from an advanced LED technology that was not available when the original boards were
made by Williams / Data East. We spent quite a bit of time matching the original color and
brightness and are quite happy with the results.
- No High Voltage Required! These will operate with a defective +/- 100v power supply
- No Fragile Gas Display! This light weight LED display should last 10x longer than original displays
- Simple design ( 6 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors
- LEDs are made with black face to help in visual aesthetics when machine is powered off
- Board made with Black solder mask for sharper looks
- Board comes with complete set of schematics
Supported Williams Games:
- Big Guns
- Cyclone
- F14 TomCat (most - check picture above as some early models were different)
- Fire
- Space Station
- Swords of Fury
Supported Data East Games:
- Playboy 35th Ann.
- Time Machine
- Torpedo Alley
- Secret Service
|
$150 |
Williams Dual 16 Segment LED Display Board
This board replaces Williams display part numbers D12232. They are made from an advanced LED technology that was not available when the original boards were made by Williams. We spent quite a bit of time matching the original color and brightness and are quite happy with the results.
Our boards are plug-and-play compatible with the original board set. No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".
Benefits over original Williams displays (and other replacement boards):
- No High Voltage Required! These will operate with a defective +/- 100v power supply
- No Fragile Gas Display! This light weight LED display should last 10x longer than original displays
- Simple design ( 6 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors
- LEDs are made with black face to help in visual aesthetics when machine is powered off
- Board comes with complete set of schematics
Supported Games:
- Bad Cats
- Black Knight 2000
- Diner
- Earthshaker
- Jokerz
- Roller Games
- Whirlwind
|
$150 |
Bally/Williams 16 Segment LED Display Board Set
These boards are sold as a set (one price for both boards). They replace Bally display part numbers D12502 and D12706. They are made from an advanced LED technology that was not available when the original boards were made by Bally. We spent quite a bit of time matching the original color and brightness and are quite happy with the results.
Our boards are plug-and-play compatible with the original board set. No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".
Benefits over original Bally displays (and other replacement boards):
- No High Voltage Required! These will operate with a defective +/- 100v power supply
- No Fragile Gas Display! This light weight LED display should last 10x longer than original displays
- Simple design ( 6 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors
- LEDs are made with black face to help in visual aesthetics when machine is powered off
- Boards come with complete set of schematics
Supported Games:
|
$150 |
Data East Dual 16 Segment A/N LED Display Board
This board replaces Williams display part numbers 520-5030-00. They are made from an advanced LED technology that was not available when the original boards were made by Williams. We spent quite a bit of time matching the original color and brightness and are quite happy with the results.
Our boards are plug-and-play compatible with the original board set. No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".
Benefits over original Data East displays (and other replacement boards):
- No High Voltage Required! These will operate with a defective +/- 100v power supply
- No Fragile Gas Display! This light weight LED display should last 10x longer than original displays
- Simple design ( 6 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors
- LEDs are made with black face to help in visual aesthetics when machine is powered off
- Board comes with complete set of schematics
Supported Games:
- ABC Monday Night Football
- Back to the Future
- Phantom of the Opera
- Robocop
- Simpsons
|
$150 |
| PinLED #10011 Display
PinLED displays are the perfect plug and play replacement for your old pinball machine gas tube plasma displays. They fit Williams System 11 and Data East pinball machines (see list below) and come with the industry’s only 5 year warranty.
New Light Emitting Diode (LED) technology runs on your game's 5 volt power supply only. This means NO HIGH VOLTAGE is necessary, so you won’t have to repair those troublesome power supplies with obsolete, unobtainable parts. No soldering is required, so anyone can install it in 10 minutes. We’ve custom manufactured the LED segments to perfectly match the format, color, and brilliance of your original displays. The Model 10011 is a 340mm x 205mm single board that fits F-14 Tomcat (Early production machines only - replaces Williams Board #D-11414. This board is larger than Model 10009. Please check your original board part number.)
|
$239 |
| PinLED #30003 Display
PinLED Bally / Stern 7 Digit Display used in all Bally and Stern Pinballs built between 1980 - 1985.
|
$54 |
| Universal Ball Shooter Assembly |
$16 |
| Kiss Pinball Playfield Overlay |
$175 |
| Eight Ball Deluxe Pinball Playfield Overlay |
$175 |
| King of Diamonds Playfield Overlay |
$175 |
Monitors, Monitor Chassis, Cap Kits & Parts |
New 19" LCD CGA/EGA/VGA/SVGA/XGA Monitor 
- Units work in CGA, EGA, VGA, SVGA or XGA resolutions
- Inputs for 6/10 pin RGB and DB15 (VGA)
- Auto Sync
- Optional arcade cabinet mounting kit (See next item below)
- Warranty: 1 Year
- 1.5M VGA Cable and +12v power supply and cord included
- UL Recognized USA & CANADA, CE and RoHS
|
$339 |
New 19" LCD Monitor Retro Frame Kit 
- Allows you to mount VP 19" LCD as a 19" CRT shelf mount monitor
- Made from 16 gauge galvanized steel
- Some Assembly required
- All hardware included
- LCD sold separately
|
$55 |
New 19" Imperial CGA CRT Monitor 
- No isolation transformer required
- Remote adjustment controls
- 1 year warranty
|
$199 |
New 19" Happ Vision Pro CGA CRT Monitor 
- No isolation transformer required
- Remote adjustment controls
- 1 year warranty
|
$199 |
New 19" Neotec CGA Monitor 
- No isolation transformer required
- Remote adjustment controls
- Power cord sold separately
|
$189 |
New 25" (24.8" viewable) Makvision CGA Resolution Color Monitor
Compatible with classic/standard resolution games.
- No isolation transformer required
- Remote adjustment controls
- Warranty: 1 Year
- UL Approved
- Power cord not included
|
$299 |
New 25" (24.8" viewable) Makvision CGA/EGA/VGA Resolution Tri Mode Color Monitor
Compatible with Golden Tee, Golden Tee Fore and Golden Tee Fore 2002-2005 and other games.
Includes an RGB and DB15 VGA connector for computer connectivity.
- No isolation transformer required
- Remote adjustment controls
- Warranty: 1 Year
- UL Approved
- Power cord not included
|
$445 |
New 29"" (27" viewable) Makvision CGA/EGA/VGA Resolution Tri Mode Flat Screen CRT Color Monitor
Compatible with Golden Tee, Golden Tee Fore and Golden Tee Fore 2002-2005 and other games.
Includes an RGB and DB15 VGA connector for computer connectivity.
- No isolation transformer required
- Remote adjustment controls
- Warranty: 1 Year
- UL Approved
- Power cord not included
|
$445 |
New 29" (27" viewable) Makvision SVGA/XGA Resolution Flat Screen CRT Color Monitor
Compatible with Golden Tee, Golden Tee Fore and Golden Tee Fore 2002-2005 and other games.
comes with an RGB and DB15 VGA connector for use with computers.
- Supported resolutions: 640x480, 800x600 and 1024x768
- No isolation transformer required
- Remote adjustment controls
- Warranty: 1 Year
- UL Approved
- Power cord not included
|
$499 |
Wells Gardner V1000 B/W Raster Monitor Flyback Transformer  |
$149 |
Motorola M5000/M7000 B/W Raster Monitor Flyback Transformer  |
$89 |
| Wells Gardner D9200 27" Monitor Flyback Transformer |
$79 |
| Wells Gardner D9400 27" Monitor Flyback Transformer |
$69 |
| Wells Gardner 33K8000 33 CGA " Monitor Flyback Transformer |
$85 |
| Makvision 24.8" CGA/TRI-Mode Monitor Flyback Transformer |
$59 |
| Makvision 27" TRI-Mode Monitor Flyback Transformer |
$59 |
| Makvision 27" XGA Monitor Flyback Transformer |
$89 |
| Wells Gardner K6100/K6400 X/Y Color Monitor Flyback Transformer |
$79 |
Cinematronics/Keltron NOS B/W X/Y Flyback Transformer
Used in most Cinematronics games like Star Castle, Armor Attack, Rip Off, Solar Quest, Tail Gunner, others... |
$45 |
Nintendo Sanyo 20-EZ Replacement Flyback Transformer
Monitor found in most Nintendo games like Donkey Kong, Donkey Kong Jr. and other Nintendo games. |
$49 |
| Amplifone Color Vector Monitor Flyback Transformer |
$99 |
| Vision Pro 19" CGA Standard Resolution Flyback Transformer MCK-20A036 |
$35 |
| Neotec CGA Standard Resolution Flyback Transformer |
$68 |
| Neotec EGA Medium Resolution Flyback Transformer |
$68 |
| Neotec VGA Resolution Flyback Transformer |
$68 |
| Electrohome G07 Monitor Flyback Transformer |
$19 |
| Wells Gardner K7000 Series Monitor Flyback Transformer |
$19 |
| Wells Gardner K7200 Monitor Flyback Transformer |
$29 |
| Wells Gardner K7201 Monitor Flyback Transformer |
$59 |
| Wells Gardner K7203 Monitor Flyback Transformer |
$65 |
| Wells Gardner K7400 & K7500 Monitor Flyback Transformer |
$29 |
| Wells Gardner K8000 Monitor Flyback Transformer |
$89 |
| Wells Gardner U2000 25"/27" Monitor Flyback Transformer |
$29 |
| Wells Gardner U3000 Monitor Flyback Transformer |
$79 |
| Wells Gardner U5000 Monitor Flyback Transformer |
$79 |
| Hantarex "Polo" Monitor Flyback Transformer |
$21 |
| Hantarex MTC 9000 14"-25" Monitor Flyback Transformer |
$29 |
| Hantarex MTC 9000 10" Monitor Flyback Transformer |
$39 |
| Hantarex MTC 900E Monitor Flyback Transformer |
$45 |
| Matsushita TM201/TM202/NMX-L21G Flyback Transformer (TLF-6041F) |
$28 |
| Kortek 13"/19" Flyback Transformer FN-1441BA / MCG-20A34 |
$35 |
Electrohome/Wells Gardner B/W Vector Monitor High Voltage Diode
Used in many B/W X/Y vector monitor games. |
$12 |
Donkey Kong/Donkey Kong Jr. Monitor Conversion Kit
Kit inverts video and amplifies sound which makes our new VP2 monitor compatible with DK/DK Jr. uprights utilizing a two board set. |
$69 |
Donkey Kong/Donkey Kong Jr. Monitor Conversion Kit with intergrated power supply
Kit inverts video and amplifies sound which makes new monitors compatible with DK/DK Jr. uprights utilizing a two board set
and includes a power supply conversion kit. |
$99 |
LV2000 v2 - Low Voltage Power Supply Retrofit for WG 6100 Color XY Monitors
Upgrade your deflection board to prevent low voltage failures! |
$39 |
| Wells Gardner 19" 6100 Color XY Monitor Rebuild (cap/transistor) Kit |
$20 |
| Wells Gardner 19" 6100 Color XY Extra Parts Kit |
$20 |
| Amplifone 19" or 25" XY Monitor Rebuild (cap/transistor) Kit |
$20 |
| Electrohome G08-003 Color X/Y Monitor Rebuild (cap/transistor) Kit |
$15 |
| Electrohome G05-801 B&W X/Y Monitor Rebuild (cap/transistor) Kit |
$15 |
| Electrohome G05-802/805 B&W X/Y Monitor Rebuild (cap/transistor) Kit |
$15 |
| Wells Gardner 19V2000 B&W X/Y Monitor Rebuild (cap/transistor) Kit |
$15 |
Electrohome G07-CBO 19" Monitor Rebuild Cap Kit
Most common monitor in Galaga/Ms. Pac-Man & Centipede uprights/cocktails |
$10 |
| Electrohome G07-CAO 19" Monitor Rebuild Cap Kit |
$10 |
Electrohome G07-FB0 13" Monitor Rebuild Cap Kit
Most common monitor found in Galaga/Ms. Pac-Man mini/cabarets |
$10 |
| Wells Gardner K3000 14" Monitor Rebuild Cap Kit |
$12 |
| Wells Gardner K4500 19"/25" Monitor Rebuild Cap Kit |
$10 |
| Wells Gardner K5500 19" Monitor Rebuild Cap Kit |
$10 |
| Wells Gardner K4600 19" Monitor Rebuild Cap Kit |
$10 |
| Wells Gardner K4700 13" Monitor Rebuild Cap Kit |
$10 |
Wells Gardner K7000 Monitor Rebuild Cap Kit
Model #'s K70xx, K71xx, K76xx, K78xx and K79xx |
$10 |
| Wells Gardner K4800 13" Monitor Rebuild Cap Kit |
$10 |
| Wells Gardner K4900 19" Monitor Rebuild Cap Kit |
$10 |
| Wells Gardner K7302 Color Monitor Rebuild Cap Kit |
$15 |
| Wells Gardner K7401 25" Color Monitor Rebuild Cap Kit |
$12 |
| Wells Gardner K7500 25" Color Monitor Rebuild Cap Kit |
$12 |
| Wells Gardner u2000 25" Color Monitor Rebuild Cap Kit |
$12 |
| Wells Gardner u5000 25" Color Monitor Rebuild Cap Kit |
$12 |
| Wells Gardner v1000 19"/23" B&W Raster Monitor Rebuild Cap Kit |
$10 |
Nintendo Sanyo 20-EZ 13"/19"
Monitor Rebuild Cap Kit Monitor found in most Nintendo games like
Donkey Kong, DK Jr. Fixes problems like
vertical foldover and jail bars. |
$10 |
Nintendo Sanyo 20-EZ 13"/19"
Monitor Rebuild Plus Cap Kit Monitor found in most Nintendo games like
Donkey Kong, DK Jr. Fixes problems like
vertical foldover and jail bars. Contains additional caps. |
$15 |
Nintendo Sanyo 20-EZ Monitor Video Inversion Kit
This conversion kit will invert the negative video to positive video for use with newer games (JAMMA PCBs). |
$10 |
| Sanyo/Atari 14" Color Monitor Rebuild Cap Kit |
$10 |
| Matsushita/Atari 14" Color Monitor Rebuild Cap Kit |
$10 |
| Matsushita/Atari TM201G Color Monitor Rebuild Cap Kit |
$10 |
| Matsushita/Atari TM202G 19" Color Monitor Rebuild Cap Kit |
$10 |
| Nanao/Sega MC1400S 14" Color Monitor Rebuild Cap Kit |
$10 |
| Nanao/Sega MC2000S 20" Color Monitor Rebuild Cap Kit |
$10 |
| Sharp/Nintendo XM1801N 19" Color Monitor Rebuild Cap Kit |
$10 |
| Sharp/Atari XM2001N 19" Color Monitor Rebuild Cap Kit |
$10 |
| Disco/Atari 2090DT-2B 19" Color Monitor Rebuild Cap Kit |
$10 |
| Disco/Atari AGM20M 19" Med. Res. Color Monitor Rebuild Cap Kit |
$10 |
| Hantarex MTC 900/E 14"/19" Monitor Rebuild Cap Kit |
$10 |
| Hantarex MTC 9000 10"/14"/20"/25" Monitor Rebuild Cap Kit |
$10 |
| Hantarex MTC Polo 10" - 33" Monitor Rebuild Cap Kit |
$12 |
| Kortek K1-2-VOA 13" / 19" Monitor Rebuild Cap Kit |
$10 |
Motorola M5000 19" / M7000 23" B/W Monitor Rebuild Cap Kit  |
$10 |
Motorola XM501 19" / XM701 23" B/W Monitor Rebuild Cap Kit  |
$10 |
Tec TM600 19" / TM623 23" B/W Monitor Rebuild Cap Kit  |
$12 |
Telco KT-1403V 14" VGA Monitor Rebuild Cap Kit
Used in Megatouch games - Type 51 Monitor |
$18 |
| Neotec NT-2500 25" CGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-2501 25" EGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-2515c 25" Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-25e 25" Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-2700 27" CGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-2701 27" EGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-2702 27" VGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-31e Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-31c Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-31e 33" Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-31v Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-3300 33" CGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-3301 33" EGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-3302 33" VGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-3500 38" CGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-3501 36" EGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-3602 36" VGA Monitor Rebuild Cap Kit |
$12 |
| Neotec NT-500DX Monitor Rebuild Cap Kit |
$12 |
| Electrohome G07 Monitor Horizontal Width Coil |
$9 |
| Wells Gardner K4900 Monitor Horizontal Width Coil |
$17 |
| Wells Gardner K7000 Series Monitor Horizontal Width Coil |
$15 |
| Isolation Transformer (20+ years old monitors requirement) |
$19 |
Video Signal Cable (6 pin)
Works with all major monitor brands and models |
$3  |
Degaussing Coil
Cleans up washed out colors on monitors |
$25 |
Electrohome G05-801 Monitor to Wells Gardner V2000 Cabinet Adapter
Allows a G05-801 monitor to be used in a cabinet wired for a V2000 monitor |
$20 |
Wells Gardner V2000 Monitor to Electrohome G05-801 Cabinet Adapter
Allows a V2000 monitor to be used in a cabinet wired for a G05-801 monitor |
$20 |
|
|
Programmable Multicade JAMMA PCB
Multicade & Multi-Williams JAMMA PCB - Simple user programmable PCB. |
$379 3+ $359 |
Asteroids High Score Save Kit with Extended scoring
Saves High Scores plus extended scoring! Plug and play |
$45 |
Battle Zone High Score Save Kit
Saves High Scores! Plug and play |
$45 |
Red Baron ROM Saver
Eliminates the original program EPROMs and sockets |
$45 |
Bosconian High Score Save Kit
Saves High Scores! Plug and play |
$45 |
Congo Bongo High Score Save/Free Play Kit
Saves High Scores and offers Free Play! Plug and play |
$45 |
Complete - Donkey Kong/Donkey Kong II Multigame Kit
This is a complete kit with DK/DK2 games.
Adds new features: New levels, Free play, High score save & Diagnostics... |
$79 |
Upgrade - Donkey Kong/Donkey Kong II Multigame Kit
This is an software upgrade only for existing DK high score kit owners.
Adds new features: New levels, Free play, High score save & Diagnostics... |
$40 |
Donkey Kong High Score/Diagnostics/Free Play kit
Adds new features: Free play, High Score Save & Diagnostics... |
$45 |
Donkey Kong Jr. High Score/Diagnostics/Free Play kit
Adds new features: Free Play, High Score Save & Diagnostics... |
$45 |
Donkey Kong 3 High Score Save Kit with Free Play
Saves High Scores plus Free Play! Plug and play |
$45 |
Donkey Kong Foundry High Score/Diagnostics/Free Play kit
Adds new features: New foundry level, Free play, High score save, & Diagnostics... |
$55 |
Frogger High Score Save/Free Play Kit
Adds new features: High score save and Free Play! |
$45 |
Mario Bros. Free Play kit
Adds new features: High score save and Free play! |
$45 |
Missile Command Multigame Kit
This kit will extend your boardset to play additional games. |
$59 |
MultiPede Multigame Kit
This kit will extend your atari Millipede boardset to play BOTH Centipede and Millipede!
Also available is a Millipede PCB to Centipede cabinet adapter which allows you use use
a Millipede PCB in a Centipede cabinet. |
$85 |
Millipede PCB to Centipede Cabinet Adapter
Use your Millipede/Multipede PCB in a Centipede cabinet!
Take $5 off when purchased with a Multipede kit |
$35 |
Popeye High Score Save/ Free Play Kit
Saves High Scores and offers Free Play! Plug and play |
$45 |
Pengo Enhancement Pack / High Score Save Kit
Saves High Scores and more! Plug and play |
$45 |
Reactor High Score Save Kit
Saves High Scores! Plug and play |
Out of stock |
Space Invaders Multigame Kit
This kit will extend your boardset to play additional games. |
$59 |
Super Pac-Man High Score Save Kit
Saves your high scores when the game is not on! |
Out of stock |
Xevious High Score Save Kit
Saves High Scores! Plug and play |
$45 |
Zaxxon Free Play kit
Adds new features like deluxe free play, high score save and on screen settings! |
$45 |
|
|
Moon Patrol JAMMA Adapter
Allows a Moon Patrol PCB to be used with a JAMMA harness |
$40 |
Konami/Stern Cabinet to JAMMA PCB Adapter
This adapter will enable a JAMMA PCB to work in a Konami/Stern Cabinets: Amidar, Bimmelbahn, Circus Charly, Commando (Konami), Dommy, Eggs, Frogger, Gyruss, Iron Horse, Jail Break, Juno First, Kicker, Locomotion, Lost Tomb, Mega Zone, Mikie, Moonwar, Nemesis, Pandora's Palace, Pooyan, Road Fighter, Rock'n Rope, Rush 'n Attack, Scramble, Scrambled Egg, Space Pilot, Strategy X, Super Basketball, Super Cobra, The End, Time Pilot, Time Pilot '84, Turpin, Turtles, Tutankham & Yie Ar Kung Fu. Adapter also has a connectors for optional buttons! |
$35 |
Galaga Cabinet to JAMMA PCB Adapter with -5 V.D.C Power Supply
This adapter will enable a JAMMA PCB to work in these cabinets: Galaga, Galplus, Galaga 3, Bosconian, Mappy, Alien Sector, Baraduke, Dig Dug, Dig Dug II, Libble Rabble, Metro-Cross, Phozon, Sky Kid, & Super Xevious. Adapter also has a connectors for optional buttons! |
$39 |
Ms. Pac/Pac-Man Cabinet to JAMMA PCB Adapter
This adapter will enable a JAMMA PCB to work in a Ms. Pac/Pac Cabinet. Adapter also has a connectors for optional buttons! A switching power supply is required. |
$35 |
| Type A JAMMA Finger Board |
$2 |
| Type B JAMMA Finger Board |
$4 |
24 Pin Card Edge Connector - Solder Eyelet
Use with JAMMA finger boards |
$5 |
36 Pin Card Edge Connector - Solder Eyelet
Use with JAMMA finger boards |
$5 |
44 Pin Card Edge Connector - Solder Eyelet
Use with JAMMA finger boards |
$5 |
56 Pin Card Edge Connector - Solder Eyelet
Use with JAMMA finger boards |
$5 |
Phoenix JAMMA Adapter  |
$45 |
Pleiades JAMMA Adapter  |
$45 |
| Mr. Do! JAMMA Adapter with Sound Amplifier |
$39 |
| Mr. Do's Castle JAMMA Adapter with Sound Amplifier |
$39 |
| Mr. Do's Wild Ride JAMMA Adapter with Sound Amplifier |
$39 |
| Do! Run Run JAMMA Adapter with Sound Amplifier |
$39 |
| Mr. Do! (Yankee Do!) JAMMA Adapter with Sound Amplifier |
$39 |
| Mr. Do! Vs. Unicorns JAMMA Adapter with Sound Amplifier |
$39 |
| Lady Bug JAMMA Adapter with Sound Amplifier |
$39 |
| Cosmic Avenger JAMMA Adapter with Sound Amplifier |
$39 |
Centipede JAMMA Adapter with Sound AMP
Here are the Centipede JAMMA pinouts for this adapter.... |
$45 |
Millipede PCB to Centipede Upright/Mini Cabinet Adapter
Use your Millipede/Multipede PCB in a Centipede cabinet!
This adapter works great with MultiPede |
$35 |
Millipede PCB to Centipede Cocktail Cabinet Adapter
Use your Millipede/Multipede PCB in a Centipede cabinet!
This adapter works great with MultiPede |
$35 |
Centipede PCB to Millipede Upright/Mini Cabinet adapter
Use your Centipede PCB in a Millipede cabinet! |
$35 |
Centipede PCB to Millipede Cocktail Cabinet Adapter
Use your Centipede PCB in a Millipede cabinet! |
$35 |
| Galaga JAMMA Adapter |
$35 |
| Gaplus JAMMA Adapter |
$39 |
| Galaga 3 JAMMA Adapter |
$39 |
Gallag (Galaga bootleg) JAMMA Adapter Use your Gallag bootleg PCB in a JAMMA cabinet! |
$35 |
Nebulous Bee (Galaga bootleg) JAMMA Adapter Use your Nebulous bootleg PCB in a JAMMA cabinet! |
$35 |
| Metro Cross JAMMA Adapter |
$39 |
| Namco Dig Dug JAMMA Adapter |
$39 |
| Mappy JAMMA Adapter |
$35 |
| Super Pac-Man JAMMA Adapter |
$55 |
| Pac-Man JAMMA Adapter |
$35 |
| Ms. Pac-Man JAMMA Adapter |
$35 |
| Pac-Land JAMMA Adapter |
$35 |
Jr. Pac-Man JAMMA Adapter Only for the field Kit version of Jr. Pac-Man (A.C.) |
$35 |
| Galaxian JAMMA Adapter |
$35 |
| Mag Max JAMMA Adapter |
$35 |
| Terra Cresta JAMMA Adapter |
$35 |
| UFO Robo Dangar JAMMA Adapter |
$35 |
| Roller Jammer JAMMA Adapter |
$35 |
| Armed Formation F JAMMA Adapter |
$35 |
| Armored Car JAMMA Adapter |
$35 |
| Circus Charlie JAMMA Adapter |
$35 |
| Dark Planet JAMMA Adapter |
$35 |
| Lost Tomb JAMMA Adapter |
$35 |
| Mikie JAMMA Adapter |
$35 |
| Minefield JAMMA Adapter |
$35 |
| Roc'n Rope JAMMA Adapter |
$35 |
| Strategy X JAMMA Adapter |
$35 |
| Tazz Mania JAMMA Adapter |
$35 |
| The End JAMMA Adapter |
$35 |
| Hustler/The Hustler/Video Hustler JAMMA Adapter |
$35 |
| Turtles JAMMA Adapter |
$35 |
| Yie Ar Kung Fu JAMMA Adapter |
$35 |
| Megazone JAMMA Adapter |
$35 |
| Rush'n Attack JAMMA Adapter |
$35 |
Frogger JAMMA Adapter
Works with the 36 pin Konami and Sega/Gremlin version PCBs only! |
$35 |
| Time Pilot JAMMA Adapter |
$35 |
| Time Pilot 84 JAMMA Adapter |
$35 |
| Tutankham JAMMA Adapter |
$35 |
| Pooyan JAMMA Adapter |
$35 |
| Gyruss JAMMA Adapter |
$35 |
| Track & Field JAMMA Adapter |
$45 |
| Hyper Olympics JAMMA Adapter |
$45 |
| Amidar JAMMA Adapter |
$35 |
| Scramble JAMMA Adapter |
$35 |
| Super Cobra JAMMA Adapter |
$35 |
| Juno First JAMMA Adapter |
$35 |
| Pandora's Palace JAMMA Adapter |
$35 |
| Rescue JAMMA Adapter |
$35 |
Donkey Kong JAMMA Adapter
Get the optional Rainbow Power Cable for $2! |
$43 |
Donkey Kong Junior JAMMA Adapter
Get the optional Rainbow Power Cable for $2! |
$43 |
Donkey Kong 3 JAMMA Adapter
Get the optional Rainbow Power Cable for $2! |
$43 |
Double Donkey Kong JAMMA Adapter
Get the optional Rainbow Power Cable for $2! |
$43 |
Popeye JAMMA Adapter
Get the optional Rainbow Power Cable for $2! |
$43 |
Mario Bros. JAMMA Adapter
Get the optional Rainbow Power Cable for $2! |
$43 |
| Alex Kidd (Sega System 16/24) JAMMA Adapter |
$45 |
| Alien Syndrome (Sega System 16/24) JAMMA Adapter |
$45 |
| ESWAT (Sega System 16/24) JAMMA Adapter |
$45 |
| Golden Axe (Sega System 16/24) JAMMA Adapter |
$45 |
| Shinobi (Sega System 16/24) JAMMA Adapter |
$45 |
| Quartet (Sega System 16/24) JAMMA Adapter |
$45 |
| Fantasy Zone (Sega System 16/24) JAMMA Adapter |
$45 |
| Wonder Boy III (Sega System 16/24) JAMMA Adapter |
$45 |
| Aurail (Sega System 16/24) JAMMA Adapter |
$45 |
| Major League (Sega System 16/24) JAMMA Adapter |
$45 |
| Tetris (Sega System 16/24) JAMMA Adapter |
$45 |
| Cotton (Sega System 16/24) JAMMA Adapter |
$45 |
| Bonanza Bros (Sega System 16/24) JAMMA Adapter |
$45 |
| Scramble Spirits (Sega System 16/24) JAMMA Adapter |
$45 |
| Gain Ground (Sega System 16/24) JAMMA Adapter |
$45 |
| Capcom Ghost 'n Goblins JAMMA Adapter |
$45 |
| Capcom Legendary Wings JAMMA Adapter |
$45 |
| Capcom Commando JAMMA Adapter |
$45 |
| Capcom Exed Exes JAMMA Adapter |
$45 |
| Capcom Section Z JAMMA Adapter |
$45 |
| Capcom Trojan JAMMA Adapter |
$45 |
| Capcom Gunsmoke JAMMA Adapter |
$45 |
|
|
Ms. Pac-Man ribbon Cable
Used to connect AUX PCBs to Pac-Man PCBs |
$5  |
Nintendo inter-board power (rainbow) cable
Used on Donkey Kong and Donkey Kong Jr. - Connect to P12 on the CPU PCB and P4 on the Video PCB |
$5  |
Multicade Upright JAMMA Wiring Harness for 19" Monitor Cabinet with Joystick/Trackball Panel Harness
Solution has everything and is fully assembled with connectors, test/credit switch and bracket. Plug and play. |
$55 |
Multicade Upright JAMMA Wiring Harness for 25" Monitor Cabinet with Joystick/Trackball Panel Harness
Solution has everything and is fully assembled with connectors, test/credit switch and bracket. Plug and play. |
$55 |
Multicade Upright JAMMA Wiring Harness for 19" Monitor Cabinet with Joystick Panel Harness
Solution has everything and is fully assembled with connectors, test/credit switch and bracket. Plug and play. |
$55 |
Multicade Upright JAMMA Wiring Harness for 25" Monitor Cabinet with Joystick Panel Harness
Solution has everything and is fully assembled with connectors, test/credit switch and bracket. Plug and play. |
$55 |
Multicade/Multigame Cocktail Complete JAMMA Wiring Harness with panel harnesses
Solution has everything and is fully assembled with connectors, test/credit switch and bracket. Plug and play. |
$55 |
Multi-Williams Upright JAMMA Wiring Harness with panel harness
Solution has everything and is fully assembled with connectors, test/credit switch and bracket. Plug and play. |
$55 |
Galaga Wiring Harness (complete solution) Solution
has everything needed like power supply, connectors and power cord.
Plug and play. Note: If you're using an older monitor requiring an isolation transformer, this
kit does not contain this item. |
$125 |
Galaga Wiring Harness You add power supply, pins & connectors
Note: If you're using an older monitor requiring an isolation transformer, this
kit does not contain this item. |
$45 |
Ms. Pac-Man Wiring Harness (complete solution) Solution
has everything needed like power supply, connectors and power cord.
Plug and play. Note: If you're using an older monitor requiring an isolation transformer, this
kit does not contain this item. |
$125 |
Ms. Pac-Man Wiring Harness You add power supply, pins & connectors
Note: If you're using an older monitor requiring an isolation transformer, this
kit does not contain this item. |
$40 |
Donkey Kong/DK Jr./Donkey Kong 3 Wiring Harness and power supply solution (complete solution) All wiring
needed to hook up the pcb. Note: +24 vdc is not supplied for the coin counter. |
$125 |
MCR Ribbon Cable Set (5 cables)
Used in MCR games such as Tron, Discs of Tron, Spy Hunter, Tapper, Timber, Kick, Etc... |
$25 |
Nintendo PCB ribbon cable For Donkey
Kong/Donkey Kong Jr and Others... |
$10 |
Jamma Harness Jamma edge connector with
wires for power, speakers, coin switches, start switch and controls |
$18 |
Super Jamma Harness Same as Jamma Harness
but with connectors attached. |
$35 |
Chips, RAMs, ROMs, EPROMs, Kits & Upgrades |
Replacement Atari AVG - Analog Vector Generator
Atari part number 137179-001 is a gate array found in various color vector games such as Space Duel, Gravitar, Black Widow, Quantum, Star Wars, and Major Havoc. Unfortunately, no low cost source exists for these original chips and therefore several individuals have endeavored to provide alternative solutions. Until now, most of these consisted of several TTL chips on a rather largish board. Their main selling point was "ease of repair." In other words, they have a higher failure in time and lower MTBF than a single IC solution can provide.
Now you can replace that broken AVG IC on your Atari color vector board with a simple, small, all-in-one solution. This replacement utilizes a Xilinx CPLD in place of all those nasty TTL ICs. The socket connection consists of round pins for a smooth connection and easy replacement of your existing gate array. To date, this design has been tested in Space Duel, Major Havoc, and Star Wars.
|
$35 |
Atari A/R and A/R II-01 (Audio Regulator) Power supply rebuild kit
This kit along with a new Big Blue cap will keep your game running. |
$15 |
Atari A/R II-02 to -06 (Audio Regulator) Power supply rebuild kit
This kit along with a new Big Blue cap will keep your game running. |
$19 |
Atari A/R III (Audio Regulator) Power supply rebuild kit
This kit along with a new Big Blue cap will keep your game running. |
$20 |
RGB to NTSC Video Encoder Deluxe v4.1
Convert RGB to Video, S-Video & Component Video! |
$95 |
RGB to PAL Video Encoder Deluxe v4.1
Convert RGB to Video, S-Video & Component Video! |
$95 |
RGB Video Encoder Component v4.1
Convert RGB to Component Video ONLY! |
$79 |
RGB to NTSC Video Encoder v3.1
Convert RGB to NTSC Video & S-Video! |
$75 |
RGB to PAL Video Encoder v3.1
Convert RGB to PAL Video & S-Video! |
$75 |
| Atari Big Blue Transformer Cap |
$12 |
| Midway/MCR 55k uf MCR Transformer Cap |
$15 |
| Midway/MCR 100k uf MCR Transformer Cap |
$20  |
Vertical/Horizontal pot on Donkey Kong, Donkey Kong Jr. Video PCB's
These are the two pots on the video boards which get broken easy. |
$2 |
Z80 CPU I.C.
Utilitzed on Midway boards & others |
$4 |
6502 CPU I.C.
Used on many Atari PCBs |
$5 |
6802 MPU I.C.<
Used on many Williams PCBs/TD>
| $12 |
6821P Peripheral Interface Adapter (P.I.A.)
Chip used in Williams games, replace if some or all controls don't work |
$5 |
SN76477N Sound Generator Chip
Utilitzed on Midway boards |
Out |
TMS5220 Speech I.C.
Utilitzed on Atari boards |
$9 |
LM1877N Sound Amp I.C.
Utilitzed on Pac-Man & Ms. Pac-Man PCBs |
$5.95 |
LM380N Sound Amp I.C.
Universal Sound I.C. |
$3.50 |
Replacement 54xx Galaga Boom Sound Chip
This custom chip generated these sounds |
$20 |
| Replacement Atari/Midway 51xx Custom Chip |
$25 |
| Replacement Galaga 05xx Starfield Generator Custom Chip |
$25 |
Smash T.V. v8 Pleasure Dome EPROM Chips Addes the Pleasure Dome! |
$15 |
Tempest Tubes EPROM Chip Replaces all the levels with new tubular patterns! |
$15 |
Pac-Man/Ms. Pac-Man Sync Buss Controller 285 Daughter card
New compact design! |
$20  |
Pac-Man/Ms. Pac-Man VRAM Addresser 284 Daughter card
New compact design! |
$20  |
Replacement Atari EA-ROM Chip
New design runs off +5 vdc. Great for use with Atari PCBs and JAMMA adpters |
$20 |
2532 EPROM (programmed for $15)  Used in many games like Pac/Ms. Pac-Man... |
$3 |
2732 EPROM (programmed for $15)  Used in many games like Galaga... |
$3 |
2764 EPROM (programmed for $15)  Used in many games... |
$3 |
27C010 EPROM (programmed for $15)  Used in many games... |
$5 |
27C040 EPROM (programmed for $15)  Used in many games... |
$5 |
ER-2055 EA-ROM  Chip used in Atari games to save high scores |
$8 |
| MB3730 Sound AMP (used) |
$8 |
| MB3730 Sound AMP (NOS) |
$12 |
| BU406D XY (vector) Monitor Transistor |
$4 |
2N3716 XY (vector) Monitor Deflection Transistor Used in B/W and color vector monitors |
$3 |
2N3792 XY (vector) Monitor Deflection Transistor Used in B/w and color vector monitors |
$3 |
| 2N6107 Transistor |
$1.95 |
1.5 AMP Pig Tail Fuse
Used on Sanyo Monitors & Others... |
$2 |
3 AMP Pig Tail Fuse
Used on Sanyo Monitors & Others... |
$2 |
68 Ohm, 2 Watt Ceramic Resistor
Used on Electrohome monitor... |
$2 |
2SD870 Horizontal Output Transistor (H.O.T.) Transistor used in monitors like Electrohome G07 and others... |
$5 |
2SC1106 Voltage Regulator Transistor used in monitors like Electrohome G07 and others... |
$5 |
2N3055 Voltage Regulator Used in Atari Audio/Regulator power supplies... |
$5 |
UA78GU1C 4-Pin Voltage Regulator (LM78MGCP)
Utilized on Pac/Ms. Pac-Man & Galaxian boards |
$4.95 |
HA11244 I.C. Use if you have vertical hold problems... Chip used in monitors like Electrohome G07 and others... |
$12 |
2SA940 Transistor Used in sound amps... |
$4 |
2SC2073 Transistor Used in sound amps... |
$4 |
Nintendo Sanyo 20EZ Audio Board Repair Kit
Sound board found in most Nintendo games. Fixes missing sound/humming |
$10 |
Nintendo Sanyo 20EZ Audio Board (refurbished)
Sound board found in most Nintendo games. |
$28 |
MCR Lithium Battery Conversion Kit
Replace the corroded battery and save your board! Works with games like Tron, Spy Hunter, etc... |
$8 |
Williams Lithium Battery Conversion Kit
Replace the corroded battery holder and save your board! |
$8 |
2114 RAM Chip (6 for $15)
Used in *many* games |
$3 |
2125 RAM I.C.
Used on Pac-Man & Ms. Pac-man |
$7 |
2148/2149 RAM I.C.
Used on GAlaga and others... |
$3 |
6116/4016 RAM I.C.
Used on Galaga and others... |
$5 |
4116 RAM Chip Set of 25 RAMs
Replace these if you get RAM errors or if your Williams game re-starts. If you have the original power
supply, make sure it works or any new RAMs could burn up! |
$29 |
4116 RAM Chip
Replace these if you get RAM errors or if your williams game re-starts. If you have the original power
supply, make sure it works or any new RAMs could burn up! |
$2 |
Pac-Man/Ms. Pac-Man Hum Bar Repair Kit
Eliminates hum bar (scrolling wave) in the picture |
$12 |
| 16 Pin I.C. Socket |
$.25 |
| 18 Pin I.C. Socket |
$.25 |
| 20 Pin I.C. Socket |
$.25 |
| 24 Pin I.C. Socket |
$.35 |
| 32 Pin I.C. Socket |
$.35 |
| 40 Pin I.C. Socket |
$.50 |
Trackball Kits, Units, Rollers, Bearings, Balls & Parts
If your old rollers are worn
down, then you should replace them! A new ball helps the looks. |
New 4" Atari Black Trackball Ball
For Missile Command Atari (X&O) Football, Atari Basketball, Atari Baseball & Atari Soccer |
$35 |
New 4" Atari Trackball Bearing Set
Kit comes with 5 bearings - For Missile Command Atari (X&O) Football, Atari Basketball, Atari Baseball & Atari Soccer |
$15 |
4" Atari Trackball Roller set (2 rollers per set)
For Missile Command Atari (X&O) Football, Atari Basketball, Atari Baseball & Atari Soccer |
$20 |
2¼" Wico/Imperial Trackball Rebuild Kit
Kit comes with bearings, rollers and idler bearing pin |
$20 |
3" Wico/Imperial Trackball Rebuild Kit (6 Bearings and 3 Rollers) Makes your trackball function like new.
This kit will work in: Wico & Imperial trackball units |
$20 |
Wico/Imperial Trackball Optic Board
Makes your trackball function like new. This kit will work in: Wico & Imperial trackball units |
$18 |
2¼" Off White Ball For
Centipede upright, mini & cocktail, Missile Command mini &
cocktail Replace your crappy looking ball. |
$8 |
2¼" Snow White Ball For
Centipede upright, mini & cocktail, Missile Command mini & cocktail. |
$8 |
Imperial New 2¼" Trackball Unit
For games like Multicade, Centipede... |
$49 |
Imperial New 2¼" Trackball Unit with PS/2 Interface
For games like Multicade, Centipede... |
$65 |
Complete Atari New 2¼" Trackball Unit
For games like Multicade, Centipede... |
$68 |
Complete Atari New 2¼" USB/PS/2 Trackball Unit
Perfect for computer based game systems such as MAME. |
$89 |
Imperial New 3" Trackball Unit
For games like Golden Tee, Millipede, Crystal Castles, Bowling... |
$65 |
Imperial New 3" Trackball Unit with PS/2 Interface
Perfect for computer based game systems such as MAME. |
$65 |
| Atari 3" trackball unit with White, Black, Red, Blue or Green ball
For Golden Tee Golf, Millipede, Crystal Castles, Bowling & Marble Madness... |
$73 |
| Atari 3" USB/PS/2 Trackball Unit with White, Black, Red, Blue or Green ball
For Golden Tee Golf, Millipede, Crystal Castles, Bowling & Marble Madness... |
$89 |
| 2¼" Trackball Unit Mouting Plate |
$15 |
| 3" Trackball Unit Mouting Plate |
$10 |
| 3" Black ball For Millipede & others... |
$25 |
| 3" White ball For Golden Tee Golf & others... |
$25 |
| 3" Red Translucent ball
For Marble Madness & others... |
$25 |
| 3" Blue Translucent ball
For Marble Madness & others... |
$25 |
| 3" Green Translucent ball |
$25 |
| 2¼" Atari Trackball Rollers (3 Rollers) |
$10 |
2¼" Atari Trackball Kit (6
Bearings and 3 Rollers) Make your trackball work like new. This kit
will work in: All Centipede models, Missile Command mini & cocktail
and others... |
$20 |
| 3" Atari Trackball Rollers (3 Rollers) |
$10 |
3" Atari Trackball
Kit (6 Bearings and 3 Rollers) Make your trackball work like new.
This kit will work in: Millipede upright & cocktail, Cystal Castles
upright & cocktail, Marble Madness and others... |
$20 |
3" Imperial Trackball Rollers (3 Rollers)
Imperial trackball units found in Golden Tee Golf |
$10 |
| Atari Trackball Bearings (6 bearings
- fits both 2¼" & 3" trackballs) |
$15 |
Atari Style Trackball Optic Board
Needed if movement is jumpy or erratic or doesn't work in one direction.
(For 2¼" & 3" Trackballs only) |
$19 |
| Atari Trackball Wiring Harness |
$10 |
|
|
New complete Major Havoc Controller Unit
Features: Translucent rollers, stainless steel shafts, bearings and more. |
$195 |
New Major Havoc Translucent Roller
OEM roller is interchangeable with earlier reproduction and OEM (Atari) controllers. |
$29 |
| Four Way Micro Switch Red Ball Handle Joystick |
$21 |
| Eight Way Micro Switch Red Ball Handle Joystick |
$21 |
Galaga Micro Switch Red Ball Handle Joystick with Powder Coated Mounting Plate
Mounts to an original Galaga control panel |
$27  |
Galaga Powder Coated mounting plate for Red Ball Handle Joystick
|
$11  |
Ms. Pac-Man Micro Switch Red Ball Handle Joystick with Powder Coated Mounting Plate
Mounts to an original Ms. Pac-Man control panel |
$27  |
| Ms. Pac-Man Powder Coated mounting plate for Red Ball Handle Joystick |
$11  |
Ms. Pac-Man/Pac-Man joystick centering grommet
Replacing this part will make your original joystick function as if new!
This part will also work in these games: Pac series games, Bosconian,
Wizard of Wor, Rally X, Burger Time, Gorf cocktail, Timber, Tapper, Galaga
3/Gaplus, Solar Fox and others... |
$19 |
Replacement Tempest Spinner Bushing Set (two bushings)
Eliminates the 'BbbuuurrrRRRrrr' sound |
$10 |
Replacement Arkanoid Spinner Knob  |
$19 |
| Replacement Arkanoid I/II Spinner Unit |
$129 |
Replacement Discs of Tron Knob  |
$19 |
Replacement Tron Spinner Bushing  |
$12 |
Atari Control Yoke Thumb Trigger Rebuild Kit
Kit works on Star Wars, Return of the Jedi, Firefox and others... |
$15 |
Williams joystick rebuild kit  Makes your worn out upright joystick feel new! |
$35 |
| Reproduction Joust/Joust II Upright Joystick Ball and Shaft Set |
$29 |
Williams 49 Way Orange Handle Stick
Used on Arch Rivals and others... |
$19 |
8 Way Micro Switch Joystick
Red/Yellow/Green/Black/Blue |
$12 |
| Joystick Disc |
$2 |
|
|
Smoked Monitor Plexi for Midway Games such as Galaga, Ms. Pac, Burgertime, Tron...
Measures: 13 5/16" x 17 7/16" |
$12 |
Smoked Monitor Plexi for Midway Games such as Pac-Man, Galaxian, Rally-X...
Measures: 14 3/16" x 18" |
$12 |
White Plexi for Midway Cocktail Games such as Galaga, Ms. Pac, Burgertime, Tron...
Measures: 3" x 9" |
$4.50 |
White Plexi for Midway Cocktail Games such as Pac-Man, Galaxian, Rally-X...
Measures: 4 1/2" x 11" |
$4.50 |
Asteroids Upright Cardboard Monitor Bezel
These are amazing!!! |
$25 |
Atari Upright Blue Cardboard Monitor Bezel
Used on Centipede uprights... |
$25 |
Atari Cocktail Black Cardboard Monitor Bezel #1
Used on games like Asteroids & Missile Command cocktails and others... |
$15 |
Atari Cocktail Black Cardboard Monitor Bezel #2
Used on games like Centipede, Millipede, Crystal Castles cocktails and others... |
$15 |
Plastic Bezel for 19" LCD Monitors
O.D. Measures 23.031" x 22.375" and can be trimmed to fit. |
$19 |
Plastic Bezel for 19" CRT Monitors
O.D. Measures 25" x 25" and can be trimmed to fit. |
$19 |
Plastic Bezel for 25" CRT Monitors
O.D. Measures 26.94" x 24.94" and can be trimmed to fit. |
$25 |
|
|
Box of 10 #555 bulbs 6.3v push in (wedge)  Used in Pinballs... |
$5 |
Box of 10 #161 bulbs 14v push in (wedge)  Used on Midway games like Galaga & Ms. Pac |
$5 |
Box of 10 #44 bulbs 6.3v push & twist (bayonet)  Used in Atari games |
$5 |
Box of 10 #756 bulbs 14v push & twist (bayonet)  Used in Midway games like Galaga & Ms. Pac |
$5 |
| Light Bulb Socket for above wedge bulbs |
$3 |
| 18" Fluorescent Light Fixture with Bulb |
$15 |
18" Fluorescent Light Starter  |
$1 |
If you don't see what you need/want, just ask |
| Adventures of Robby Roto Manual |
$15 |
| All American Football Manual |
$15 |
| Arabian Manual |
$20 |
| Arch Rivals Manual |
$15 |
| Asteroids Cocktail Manual |
$30 |
| Astro Blaster Manual |
$15 |
| Astron Belt Manual |
$15 |
| Atari System 1 Manual |
$15 |
| Bank It Manual |
$15 |
| Bad Dudes Manual |
$15 |
| Basketball Manual |
$15 |
| Battle Zone Mini/Cabaret Manual |
$25 |
| Black Out Manual |
$15 |
| Black Tiger Manual |
$15 |
| Break Thru Manual |
$15 |
| Buck Rogers - Planet of Zoom Manual |
$15 |
| Budweiser Tappper Manual |
$25 |
| Captain Fantastic Pinball Manual |
$25 |
| Centipede Cocktail Manual |
$30 |
| Centipede Mini/Cabaret Manual |
$30 |
| Centipede Upright Manual |
$25 |
| Congo Bongo Manual |
$20 |
| Crazy Climber Manual |
$20 |
| Crystal Castles Manual |
$20 |
| Danger Zone Manual |
$15 |
| Defender Manual |
$20 |
| Dig Dug Manual & Schematics Package |
$25 |
| Donkey Kong Manual |
$15 |
| Donkey Kong Jr. Manual |
$15 |
| Donkey Kong 3 Manual |
$15 |
| Double Axle Manual |
$15 |
| Dr. Dude and his Excellent Ray Pinball Manual |
$20 |
| Dragons Lair Manual |
$35 |
| Electrohome G07 Monitor Manual |
$15 |
| Elevator Action Manual |
$15 |
| Escape from the Planet of the Robot Monsters Manual |
$15 |
| F-15 Strike Eagle Manual |
$15 |
| Frogger Manual |
$20 |
| Galaga Manual |
$30 |
| Galaxian Manual |
$20 |
| Gauntlet Manual |
$20 |
| Golden Axe Manual |
$15 |
| Gondomania Manual |
$10 |
| Gorf Manual |
$20 |
| Grand Champion Manual |
$15 |
| Guardians of the Hood Manual |
$15 |
| Gunsmoke Manual |
$20 |
| Ice Cold Beer Manual |
$20 |
| Joust Manual |
$20 |
| Jr. Pac-Man Manual |
$20 |
| Jungle Hunt Manual |
$20 |
| Jurassic Park Pinball Manual |
$20 |
| Kangaroo Manual |
$15 |
| Karate Champ Manual |
$15 |
| Kiss Pinball Manual |
$25 |
| Klax Manual |
$15 |
| Mach 3 Manual |
$20 |
| Make Trax Manual |
$15 |
| Moon Cresta Manual |
$15 |
| Mortal Kombat Manual |
$15 |
| Mortal Kombat 2 Manual |
$20 |
| Mortal Kombat 3 Manual |
$15 |
| Mortal Kombat 4 Manual |
$20 |
| Mouse Trap Manual |
$20 |
| Ms. Pac-Man Manual |
$25 |
| NBA JAM Manual |
$15 |
| Omega Race Manual |
$20 |
| Pac-Man Manual |
$25 |
| Paper Boy Manual |
$20 |
| Phoenix Manual |
$15 |
| Pit Fighter Manual |
$15 |
| Play Choice 10 Manual |
$15 |
| Pole Position Manual |
$15 |
| Popeye Manual |
$15 |
| Qbert Manual |
$25 |
| Qix Manual |
$20 |
| Rampage Manual |
$20 |
| Raven Manual |
$15 |
| RoboCop Manual |
$10 |
| Rolling Thunder Manual |
$15 |
| Root Beer Tapper Manual |
$25 |
| Rough Ranger Manual |
$15 |
| Run and Gun Manual |
$15 |
| Silver Slugger Pinball Manual |
$20 |
| Shadow Dancer Manual |
$15 |
| Shinobi Manual |
$15 |
| Sinbad Manual |
$20 |
| Smash-TV Manual |
$20 |
| Smokey Joe Manual |
$15 |
| Solar Fox Manual |
$15 |
| Space Dungeon Manual |
$15 |
| Space Odyssey Manual |
$15 |
| Solar Quest Manual |
$25 |
| Special Criminal Investigation Manual |
$15 |
| Space Duel Manual |
$20 |
| Space Fury Manual |
$20 |
| Space Invaders (Midway cocktail) Manual |
$15 |
| Space Tactics Manual |
$15 |
| Star Castle Manual |
$20 |
| Star Trek Manual |
$15 |
| Star Wars Manual |
$25 |
| Street Fighter Manual |
$15 |
| Super Contra Manual |
$15 |
| Super Off Road Manual |
$20 |
| Super Pac-Man Manual |
$20 |
| Team Quarterback Manual |
$15 |
| Teenage Mutant Ninja Turtles Manual |
$20 |
| Tempest Manual |
$25 |
| Thunder Blade Manual |
$15 |
| Thunder Jaws Manual |
$15 |
| Tiger Heli Manual |
$15 |
| Track & Field Manual |
$15 |
| Turbo Manual |
$20 |
| Vanguard Manual |
$15 |
| Virtua Fighter Manual |
$20 |
| WWF Superstarts Manual |
$25 |
| Warp Warp Manual |
$15 |
| Zaxxon Manual |
$15 |
© 2000 - 2007 ArcadeShop Amusements