Galaga Enhancement Pack
Item #: GALENPAK
$45.00
Out of stock - not available to order
New version 4.8! The Galaga Enhacement Pack gives your Galaga game an enhanced set features!
Features available with version 4.8:
- New - Rapid (auto) fire. No need to tap the fire button over and over
- New - Guest high score table. Keep guests from altering high score table
- New - Dual high Score Tables. One for fast shots and one for slow
- New - Shot speed selectable for each player in a two player game
- High score save keeps scores after the game/board is powered off
- Saves scores WITHOUT failing NVRAM. Uses a serial eprom!
- DEMO/Attract mode now available with... FREEPLAY enabled and or credits!
- Selectable on screen fire option can be enabled or disabled and shot speed set via dip switch settings
- Fast or original fire speed - selectable on screen per game, per player. Choose speed from on screen menu!
- Support for Eight digit scores! Players can achieve and record scores up to 99,999,990!
- Fast start up test. Most of the on screen testing is bypassed, start up is 80% faster
- Level 255 lockup fix. For those who can reach level 255... The game is not over.
- Support for Gallag and Nebulous Bee bootleg PCBs
- Adds support for FREE PLAY on Gallag and Nebulous Bee bootleg PCBS! No need for opening the coin door or adding a credit button! (Note: Freeplay is optional by setting the dip switches 1, 2 & 3 on)
- Title change from: "GALLAG" or "Nebulous Bee" on the attract screen to "GALAGA".
 |  |  |
| Select Fire Speed | Slow Fire Scores | Fast Fire Scores |
 |  |  |
| Test Mode | Setup Menu | Clear Scores |
Dip switch settings: Switches 6 & 7 on the bank at "6J" control the fire speed selection.
Switch Bank 6J | ||||||||
|---|---|---|---|---|---|---|---|---|
Selectable fire | SW #1 | SW #2 | SW #3 | SW #4 | SW #5 | SW #6 | SW #7 | SW #8 |
Enable selectable fire menu | - | - | - | - | - | OFF | - | - |
Set fire speed Fast, no selectable menu | - | - | - | - | - | ON | OFF | - |
Set fire speed Normal, no selectable menu | - | - | - | - | - | ON | ON | - |
Switches 1, 2 & 3 on the bank at "6K" control free play.
Switch Bank 6K | ||||||||
|---|---|---|---|---|---|---|---|---|
Coins per credit | SW #1 | SW #2 | SW #3 | SW #4 | SW #5 | SW #6 | SW #7 | SW #8 |
FREE PLAY | ON | ON | ON | - | - | - | - | - |
4 Coins = 1 Credit | ON | ON | OFF | - | - | - | - | - |
3 Coins = 1 Credit | ON | OFF | ON | - | - | - | - | - |
2 Coins = 1 Credit | ON | OFF | OFF | - | - | - | - | - |
2 Coins = 3 Credits | OFF | ON | ON | - | - | - | - | - |
1 Coin = 3 Credits | OFF | ON | OFF | - | - | - | - | - |
1 Coin = 2 Credits | OFF | OFF | ON | - | - | - | - | - |
1 Coin = 1 Credit | OFF | OFF | OFF | - | - | - | - | - |
Installation on a Midway Galaga PCB:
The SRAM PCB & chip go in locations 4M & 3J (#5).
Note: Make sure the new chips are turned the same direction as the rest of the chips on the board.
Remove the Z80 processor and install it on the new board, then install the board where the Z80 processor was.
Note: Make sure the new chips are turned the same direction as the rest of the chips on the board.
Remove the Z80 processor and install it on the new board, then install the board where the Z80 processor was.
Installation on a Gallag bootleg PCB:
The SRAM PCB & chips go in locations 5B, #5 and #6.
Note: You will have to remove the daughter board (white box in the first picture) in order to install chip #5. Make sure the new chips are turned the same direction as the rest of the chips on the board.
Remove the Z80 processor and install it on the new board, then install the board where the Z80 processor was.
Note: You will have to remove the daughter board (white box in the first picture) in order to install chip #5. Make sure the new chips are turned the same direction as the rest of the chips on the board.
Remove the Z80 processor and install it on the new board, then install the board where the Z80 processor was.
Replace the daughter board.